Program card(A)

ESC - Connect with ESC-set
External power - Connect external power(4-6V). You should connect external
                           power of 4-6V if the ESC-set without BEC
Brake on - brake is active
Brake off - non active brake
Normal Motors - for 2, 4, 6 pole motors. This timing gives maximum efficiency.
Outrunners - strongly recommended for outrunners
cut off type hard - motor is fully off immediately after reaching cut off voltage
cut off type slow down - motor turns off slowly by power reduction
Throttle curve linear - half throttle is equal as 80% of maximum RPM
Throttle curve logarithm - half throtlte is equal as 80% of maximum RPM